|jflaster on ZFS on Linux emergency Boot…|
|HarusKG on ZFS on Linux emergency Boot…|
|jflaster on Customizing Your Solaris 11 Au…|
|Raymond on Customizing Your Solaris 11 Au…|
|jflaster on Minding your ZFS pool and file…|
A place for Unix Thoughts and Ideas
Dedicated raid-dp root aggregates for each node of a Clustered Data ONTAP cluster can really eat up the drives on a small system like a FAS2220 and can seem especially wasteful since the only unique information on the drives is the logs.
Here is a little tip I got from NetApp for setting up a 2 Drive Raid-4 Root Aggregate.
By default the system will build a 1+2 raid-dp aggregate, this can be slimmed down to two drives by converting the aggregate from raid-dp to raid-4.
This can easily be done through editing the aggregate in system manager or via the CLI
::> storage aggregate modify -raidtype raid4 -aggregate aggr0clus1_01
Running on a 2 disk Raid4 root aggregate is supported and is explicitly mentioned in the Clustered Data ONTAP 8.2 Physical Storage Management Guide.
This can also be reversed through the same method, but instead of specifying raid4, you will specify raid_dp
Here is a quick trick I have found useful for when I need to keeps tabs on the realtime performance of my NetApp arrays.
7-mode only allows you 1 interactive ssh session.
However, you can launch many more non-interactive ones.
ssh testnetapp “stats show -p hybrid_aggr”
ssh testnetapp “stats show -p flexscale-access”
ssh testnetapp “priv set diag; wafltop show -i 10”